Pentair Aurora 382B Single Stage Vertical Inline Close and Split Coupled Centrifugal Pumps

Main Content Starts Here
Previous
Next

Pentair Aurora 382B Single Stage Vertical Inline Close and Split Coupled Centrifugal Pumps

Today’s room space constraints are more challenging than years ago. Pentair Aurora Vertical In-Line Pumps are specifically designed for mounting directly in a pipeline and to reduce the space required in a pump room; two pumps fit in the space of one. These modern pumps with a clean, straightforward and updated design were developed with upgraded materials of construction and a simplified offering without limiting ranges of head and capacity requirements. These pumps not only feature shared hydraulics and premium materials as standard offering, but also offer industry leading durability.

  • Mounts directly to piping.
  • Higher working pressures, up to 290 psi.
  • C-face bracket accommodates most common National Electrical Manufacturers Association (NEMA) rated motors.
  • Patented jacking mechanism for quick and easy servicing.
Find out where to purchase online or in a retail location near you.
Size and configure Aurora pumps
Launch Encompass
Locate a distributor near you
View Locations

Key Benefit

Industry leading efficiencies

- Exceeds U.S. Department of Energy (DOE) pump efficiency standards

- Redesigned pumps provide higher efficiencies

- Shared features and standard upgrades

0101
 

Components

  • Patented Jacking Mechanism simplifies seal replacement – one person operation (Split Coupled version only).
  • Ductile Iron Casing long life with higher working pressures.
  •  Standard C-Face Motor provides low noise level pump operation (Split Coupled version only).
  • Back Pull-Out Casing includes in-line suction and discharge.
  • Case Wearing Ring prevents wear on casing and is inexpensively replaced. Impeller wear rings are optional.
  • Investment Stainless Steel, Dynamically Balanced, Enclosed Impeller keyed to the shaft extension and secured by a capscrew and washer. Gaskets are used to prevent leakage to shaft end.
  • Stainless Steel Shaft designed for minimum deflection.
  • Mechanical Seal has carbon against ceramic face for optimum hot water performance. Long life is assured with 303 SST metal parts and Buna-N flexible elastomers (outside balanced seal optional).
  • Factory Hydro Test guarantees casting and seal integrity.
  • Relief Line assures adequate venting of the seal chamber and lubrication of seal faces.
  • Smooth Suction Passage vortex breaker helps to minimize pre-rotation.
  • Double Volute minimizes side load on shaft extending mechanical seal life. Note: Single Volute also available
  • Spire supports rotating element from the bottom for stability and balance during operation (Split Coupled version only).

See in Action

Resources

Downloads

Specifications

Item #Capacities ToHeads ToTEMPERATURES
382B CC12,000 gpm (2,725 m3/hr)370 feet (78 m)275° F (135° C)
382B SC12,000 gpm (2,725 m3/hr)370 feet (78 m)275° F (135° C)
Item #Capacities ToHeads ToTEMPERATURES
382B CC12,000 gpm (2,725 m3/hr)370 feet (78 m)275° F (135° C)
382B SC12,000 gpm (2,725 m3/hr)370 feet (78 m)275° F (135° C)
Show less
Back to top of page