Here to Help: Our home water experts are standing by to answer your questions.
Benefits of Iron and Manganese Filtration
Target iron, manganese, and other common contaminants all at once. Our Iron & Manganese Filter Combo system gives you a higher quality of water throughout your whole home with minimal maintenance. The multi-stage approach of this system will treat your water for chemicals, minerals, and aesthetic issues while resolving those frustrating red stains. Using an advanced non-electric dosing system, our filters deliver targeted performance to oxidize and wash away iron and manganese.
- Iron reduction up to 10 PPM
- Non-electric self-priming chemical pump
- Safe for use with septic systems
- Durable stainless steel design
- Comes with a 5 micron prefilter to reduce sediment and debris from your water
- Higher quality of water in your homes means limited environmental impact by reducing plastic bottle waste
Improve Better Taste & Odor
Reduce Iron Staining
Clearer, Sediment-Free Water
How it works
The 5 micron prefilter system helps protect your appliances and filter system from the damaging effects of dirt, debris, and other small particles of sediment.
In the patented mixing chamber, chlorine concentrate collides with your water to reduce nuisance organisms.
Greensand Plus Iron Reduction
This stage traps iron and manganese in a filter media and gravel underbed before flushing them out via backwashing.
Backwashing cycles are controlled by the electronic meter on the top of the tank. This can be set to backwash every specified number of days or as the electronic head recognizes that a certain amount of water has been used.
Our carbon filtration system improves your water’s taste and odor while reducing chlorine, chloramines, particulate matter, and other treatment chemicals.
Clack v3007-xx Bypass Fittings
Certified to NSF/ANSI Standard 61 for material safety and structural integrity only.
What is the average life expectancy of an Iron & Manganese Filter System Combo?
Depending on your water quality and the corresponding levels of iron, your new treatment system can last between 10 and 15 years if you keep up with routine maintenance.
What kind of maintenance should I expect?
You should add chlorine to the system every 2-3 months based on usage. Replace the sediment pre-filter every six months and replace the carbon and iron media system after five years.
What system is right for my home?
The WF4-P is sized for homes with 1-3 bathrooms and has a maximum flow rate of 10 GPM. The WF8-P is sized for homes with 4-6 bathrooms and has a maximum flow rate of 15 GPM.