Pentair Hydromatic SKHD150 High-Head Cast Iron Effluent Pump

Main Content Starts Here

Pentair Hydromatic SKHD150 High-Head Cast Iron Effluent Pump

Generates high heads for bigger drain fields.

KEY FEATURES

  • Two (2) Carbon/Ceramic Type 21 Mechanical Seals Mounted in Tandem
  • Oil-Filled Motor with Automatic Reset Thermal Overload for Maximum Protection (single-phase models)
  • Upper & Lower Ball Bearing Construction
  • Piggyback Plug Available for Easy Maintenance and Switch Replacement
  • Optional Seal Failure Probe Warns of Seal Leak
  • Capacitor Start for Increased Starting Torque (single-phase models)

WARRANTY

12 months from date of purchase or 18 months from date of manufacture, whichever comes first.

Find out where to purchase online or in a retail location near you.
Where to Buy

Performance Curves

PerformanceCurves_High-Head 1/2 HP Effluent PumpsHigh-Head Effluent Pump 1-1/2 HP Cast Iron, 2" NPT Discharge, 3/4" Solids Handling

Specifications

Item #Horsepower
SKDH1501-1/2
Item #Horsepower
SKDH1501-1/2

BODY CONSTRUCTION:  Class 30 Cast Iron
HORSEPOWER:  1-1/2 HP
MAXIMUM HEAD:  127'
MAXIMUM CAPACITY:  55 GPM (3.5 LPS)
FLOW at 10' LIFT:  55 GPM (3.5 LPS)
SWITCH TYPE:  standard is no switch. Optional wide-angle tethered Float Available for 1-Phase Models
MINIMUM SUMP DIAMETER:  Simplex: 24" / Duplex: 36"
DISCHARGE PIPE SIZE:  1-1/2" NPT
MAXIMUM SOLIDS HANDLING SIZE:  3/4"
AMP DRAW (full load):  6.1 amps on 208v, 3phase / 12 amps on 230v, 1phase / 6 amps on 230v, 3phase / 2.5 amps on 460v / 2 amps on 575v
CORD LENGTH:  20' STW-A
VOLTAGE:  230v 1-phase OR 208v, 230v, 460v, or 560v 3-phase, 60 Hz
MAXIMUM LIQUID TEMPERATURE:  140°F (60°C)
IMPELLER CONSTRUCTION:  Thermoplastic semi-open

Back to top of page