Pentair Myers ME4 Cast Iron Effluent Pumps

Main Content Starts Here

Pentair Myers ME4 Cast Iron Effluent Pumps

This product has been discontinued and replaced by Pentair Myers MDC series cast iron sump pump.

  • Construction – Heavy-duty cast iron motor housing and upper volute. Corrosion-resistant composite base ideal for effluent applications.
  • Bearings and Mechanical Seal – Permanently lubricated for long life.
  • Cord Seal – Prevents oil loss from and protection for motor if cord is damaged.
  • Overload Protection – Built-in thermal overload with automatic reset.
  • Intake – Built-in suction screen.
Find out where to purchase online or in a retail location near you.

Specifications

Applications: Septic Tank Effluent Removal, Sump Drainage, and Circulation
Capacities: 62 GPM 235 LPM
Shut-off Head: 32’ 9.8 m
Operation Tethered: On: 14” 355.6 mm | Off: 5” 127.0 mm
Solids Handling: 1/2” spherical capability 12.7 mm
Intermittent Liquid Temp.: 130°F 55°C
Motor: 4/10 HP, 1550 RPM, 115 Volt, 60 Hz. Class B insulation. Oil-filled shaded pole containing built-in thermal overload protection with automatic reset.
Electrical Data: 115 V, 60 Hz, single phase
Acceptable pH Range: 6-8
Shaft Seals: Mechanical carbon/ceramic
Motor Housing: Cast iron
Upper Volute Case: Thermoplastic
Lower Volute Case: Thermoplastic Vortex
Power Cord: 10’ or 20’ water resistant 16-3 gauge, type SJTW-A/SJTW with integrally grounded 3-prong plug.
Discharge, NPT: 1-1/2” 38 mm
Minimum Sump Diameter: Simplex 18” 457 mm | Duplex 30” 762mm
Item #VoltagePhase CyclesCord LengthMechanical Switch TypeSwitch Setting OnSwitch Setting Off
ME40110M1151/6010'Manual--
ME40110T1151/6010'Tethered14"5"
ME40120M1151/6020'Manual--
ME40120T1151/6020'Tethered14"5"
Item #VoltagePhase CyclesCord LengthMechanical Switch TypeSwitch Setting OnSwitch Setting Off
ME40110M1151/6010'Manual--
ME40110T1151/6010'Tethered14"5"
ME40120M1151/6020'Manual--
ME40120T1151/6020'Tethered14"5"
Show less
Back to top of page