Pentair Myers ME7 Cast Iron Effluent Pumps

Main Content Starts Here

Pentair Myers ME7 Cast Iron Effluent Pumps

  • Bearing and Mechanical Seal – Permanently lubricated for long life.
  • Overload Protection – Built-in thermal overload with automatic reset.
  • Cord Design – Prevents oil loss from and moisture protection for motor.
  • Serviceability – Heavy-duty lift-out ring, field serviceable.
  • Solids Handling – 3/4” spherical capability.
  • Stainless Steel Hardware – Allows for easy disassembly after extended service.
  • Controls – Standard controls available for automatic operation.
  • Float – Mechanical (non mercury).
Find out where to purchase online or in a retail location near you.
Where to Buy

Specifications

Applications: Effluent and Wastewater Removal, Sump Drainage, Dewatering, Flood Control
Capacities: 110 GPM 416 LPM
Shut-off Head: 58’ 17.7 m
Operation Tethered: On: 18” 459.7 mm | Off: 9” 231.1 mm
Solids Handling: 3/4” 19 mm
Intermittent Liquid Temp.: 130°F 54.4°C
Motor: 1/2 HP, 3450 RPM, 115 Volt or 230 Volt, single-phase, 60 Hz. Oil-filled. Built-in thermal overload protection with automatic reset and permanent split capacitor
Acceptable pH Range: 6-9
Shaft Seals: Type 6A or equal, Buna-N elastomers, silicon carbide sealing faces, stainless steel metal parts
Motor Housing: Cast Iron
Volute Case: Cast Iron
IMPELLER MATERIAL: Cast Iron Vortex
Power Cord: 20’ oil and water resistant 16-3 SJTW-A/SJTW with integrally grounded three-prong plug.
Discharge, NPT: 2” (50.8 mm)
Item #HPAmps (Max)VoltagePhase CyclesCord LengthMechanical Switch TypeSwitch Setting OnSwitch Setting Off
ME750120M1/213.01151/6020'Manual--
ME750120T1/213.01151/6020'Tethered18.1"9.1"
ME750220M1/26.42301/6020'Manual--
Item #HPAmps (Max)VoltagePhase CyclesCord LengthMechanical Switch TypeSwitch Setting OnSwitch Setting Off
ME750120M1/213.01151/6020'Manual--
ME750120T1/213.01151/6020'Tethered18.1"9.1"
ME750220M1/26.42301/6020'Manual--
Back to top of page