Pentair Sta-Rite PN Series Thermoplastic Shallow Well Jet Pumps

Main Content Starts Here

Pentair Sta-Rite PN Series Thermoplastic Shallow Well Jet Pumps

The PN Series pumps are corrosion and abrasion-resistant and are ideal for wells with pumping levels of 25' or less.

KEY FEATURES

  • Quality Construction - Fiberglass-reinforced thermoplastic polypropylene body provides total corrosion resistance and high resistance to abrasion.
  • Polycarbonate Impeller - Precision-molded for perfect balance and ultra-smooth for highest performance and efficiency.
  • Precision Molded Diffuser - Polypropylene diffuser allows pump to prime faster, handle more air.
  • Heavy-duty Ball Bearings - Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth quiet operation.

WARRANTY

1 year limited warranty

Find out where to purchase online or in a retail location near you.

Performance Curves

PerformanceCurves_Shallow Well Jet Pump, Thermoplastic, 1/2 to 1 HP, 115V/230V, 30-50 Switch, 1-1/4" Suction, 1" Discharge

Specifications

Item #Horsepower
PNC1/2
PND3/4
PNE1
Item #Horsepower
PNC1/2
PND3/4
PNE1

BODY CONSTRUCTION:  Thermoplastic
MAXIMUM CAPACITY:  18 GPM (PNE model)
FLOW at 10' LIFT and 40 PSI:  10.7 GPM (PND model)
MAX LIFT:  25'
MAX SHUT-OFF PRESSURE:  78 PSI (model PND)
MAXIMUM INLET PRESSURE:  22 PSI
PRESSURE SWITCH SETTING:  30 - 50 PSI
SUCTION SIZE:  1-1/4" NPT
DISCHARGE SIZE:  1" NPT
AMP DRAW (full load) - 1 HP:  7.4 amps on 230v / 14.8 amps on 115v
AMP DRAW (full load) - 3/4 HP:  6.2 amps on 230v / 12.4 amps on 115v
AMP DRAW (full load) - 1/2 HP:  4.95 amps on 230v / 9.9 amps on 115v
VOLTAGE:  230V / 115V
RECOMMENDED BREAKER:  see owner's manual
LIQUID TEMPERATURE:  140 °F / (60 °C)

CHAT
Back to top of page