Main Content Starts Here

Claris™ Flow Meter (U.S.)

The Claris Flow Meter was developed specifically to monitor the usage rate of a Claris System, and to determine the optimum cartridge replacement interval. After setting the programming unit to monitor the specific filter size, the Claris Flow Meter continuously measures the filtrate volume to calculate and display the remaining filtration capacity in litres. Once the available filtration capacity is exhausted or the maximum operation time has been reached, the display unit indicates the filter cartridge replacement.


The programming and display unit provides the following information:

  • Residual capacity of installed filter cartridge
  • Filtrate volume of the last five installed filter cartridges
  • Operation time of the last five installed filter cartridges
  • Total filtrate volume since Flow Meter installation

    Claris is a trademark of Aquis GmbH.

Specifications

Item #ConnectionOperating PressureFlow RatePressure Loss (up to 100l h flow rate) [bar]Precision (horizontal installation)Water Temperature (min max)Ambient Temperature (min max)Dimensions (BxHxT)Installation Position
EV433931In 3/8" BSP F nut / out 3/8" BSP M2 - 8 bar (29 - 116 PSI)10 - 100 (.04 - .44 gpm)0,2 (3 PSI)[%] +/-539 - 86 °F (+4 - +30 °C)39 - 104 °F (+4 - +40 °C)3.15" x 1.81" x 1.69" (80 x 46 x 43 mm)Horizontal recommended
Item #ConnectionOperating PressureFlow RatePressure Loss (up to 100l h flow rate) [bar]Precision (horizontal installation)Water Temperature (min max)Ambient Temperature (min max)Dimensions (BxHxT)Installation Position
EV433931In 3/8" BSP F nut / out 3/8" BSP M2 - 8 bar (29 - 116 PSI)10 - 100 (.04 - .44 gpm)0,2 (3 PSI)[%] +/-539 - 86 °F (+4 - +30 °C)39 - 104 °F (+4 - +40 °C)3.15" x 1.81" x 1.69" (80 x 46 x 43 mm)Horizontal recommended