Main Content Starts Here

Pentair Wellmate HP Quick Connect Tanks

Previous
Next

Hydro-Pnuematic Air/Water Tanks

Iron and sulfur removal? Hydrogen sulfide? Methane and other undesirable well gases? You need the high-performance of our HP-Quick Connect Series of hydropneumatic tanks. These units can be used for aggressive water, or as an open system where air is introduced to oxidize and aerate.

  • Large drawdown ratio increases system efficiency.
  • Adapter and UT Drain Assembly (sold separately) allow you to add 1" riser pipe to increase aeration of water.
  • Self-Adjusting Air Volume Control enhances system flexibility and ease of installation.
  • Applications for sulfur and iron water treatment, hypochloride environments and release of methane or other well gases.

HP Quick Connect Features & Benefits

Product Diagram of HP Series

Specifications

MAXIMUM OPERATING PRESSURE: 75 / 500 / 5.0
SYSTEM CONNECTION-TOP: 1/4" vent line NPT
SYSTEM CONNECTION-BOTTOM: 1 1/4" Socket
Item #CAPACITYDRAWDOWN INDIAMETER INCH CMOVERALL HEIGHT INCH CMHEIGHT INLET OUTLET TO FLOORCONNECTIONSASSEMBLY WEIGHTPALLET QUANTITY
HP-7 WM-HP-11030 / 1146.6 / 25.016 / 4143 3/4 / 1111 1/2 / 3.8Top: 1/4" vent line NPT26 / 11.89
HP-9 WM-HP-15040 / 1519.0 / 34.116 / 4156 1/2 / 1441 1/2 / 3.8Top: 1/4" vent line NPT29 /13.29
HP-8SQ WMP-HP-150-SQ40 / 1518.0 / 30.321 / 5335 1/4 / 902 / 5.1Top: 1/4" vent line NPT34 / 15.44
HP-18 WM-HP-30080 / 30317.8 / 67.421 / 5362 / 1572 / 5.1Top: 1/4" vent line NPT44 / 20.0N/A
HP-26 WM-HP-450120 / 45425.5 /96.524 / 6172 1/2 / 1842 / 5.1Top: 1/4" vent line NPT64 / 29.0N/A
Item #CAPACITYDRAWDOWN INDIAMETER INCH CMOVERALL HEIGHT INCH CMHEIGHT INLET OUTLET TO FLOORCONNECTIONSASSEMBLY WEIGHTPALLET QUANTITY
HP-7 WM-HP-11030 / 1146.6 / 25.016 / 4143 3/4 / 1111 1/2 / 3.8Top: 1/4" vent line NPT26 / 11.89
HP-9 WM-HP-15040 / 1519.0 / 34.116 / 4156 1/2 / 1441 1/2 / 3.8Top: 1/4" vent line NPT29 /13.29
HP-8SQ WMP-HP-150-SQ40 / 1518.0 / 30.321 / 5335 1/4 / 902 / 5.1Top: 1/4" vent line NPT34 / 15.44
HP-18 WM-HP-30080 / 30317.8 / 67.421 / 5362 / 1572 / 5.1Top: 1/4" vent line NPT44 / 20.0N/A
HP-26 WM-HP-450120 / 45425.5 /96.524 / 6172 1/2 / 1842 / 5.1Top: 1/4" vent line NPT64 / 29.0N/A

Note: Maximum external operating temperature 120°F (49°C). Maximum internal operating temperature 100°F (38°C). Minimum operating temperature 40°F (4°C).

* Diameter, height and weight may vary slightly without notice.

** In keeping with current industry standards, drawdown factors are based on Boyle's law. Actual drawdowns will vary depending upon system variables, including the accuracy and operation of the pressure switch and gauge and operating temperature of the system.