Main Content Starts Here

Pentair Myers V2 Series 2HP Centrifugal Grinder Pumps

The Myers V2 series grinder is engineered from the ground up, in order to overcome the increased debris and higher pressure required in today’s wastewater environment. It features a patented axial cutter design and semi-open impeller to effectively macerate challenging sewage solids into a fine slurry.

  • Cable entry system -- Provides double seal protection. Cable jacket sealed by compression fitting. Individual wires sealed by compression grommet. Power cord can be replaced without disturbing motor. Optional quick disconnect available
  • Grinder assembly -- Rotating cutter and stationary cutter are replaceable without dismantling pump. Constructed of 440 SST hardened to 57-60 Rockwell
  • Ball Bearings -- Upper ball bearing and lower double row angular contact bearing support shaft and rotor
  • Seal leak probe -- Detects water in seal housing, activates warning light in control panel
  • Volute case -- Cast iron 1-1⁄4" NPT vertical flanged discharge
  • Stator -- 2 hp, 3450 rpm, single and three phase. Oil-filled motor conducts heat and lubricates bearings
  • Heavy 416 SST shaft -- Corrosion resistant. Reduces shaft deflection due to grinding loads
  • Shaft seals -- Double tandem mechanical shaft seals protect motor. Oil-filled seal chamber provides continuous lubrication
  • Impeller -- SST, semi-open impeller handles ground slurry without clogging or binding. Pump-out vanes help keep trash from seal, reduces pressure at seal faces