Main Content Starts Here

5 HP Centrifugal Grinder Vortex Impeller

  • Capacities To 98 gpm (367 lpm)
  • Pressure To 170 ft. of head (52.0 m)
  • Liquids Handling 
    -- domestic raw sewage
  • Intermittent Liquid Temp. up to 140°F (up to 60°C)
  • Winding Insulation Temp. (Class H) 311°F (155°C)
  • Available Motors  (Single phase motors are capacitor start type. Myers control panels or capacitor kits are recommended for proper operation and warranty.)
    -- 3450 RPM: 60 Hz  3 – 5 HP, 230V, 1Ø  3 – 7½ HP, 200, 230, 460V, 3Ø
  • Std. Third Party Approvals CSA
  • Optional Approvals FM, Class 1, Group D (WGX30H)
  • Acceptable pH Range 6 – 9
  • Specific Gravity .9 – 1.1
  • Viscosity 28 – 35 SSU
  • Discharge 2 1/2 in. (63.5 mm)
  • Minimum Sump Dia.
    -- Simplex 36 in. (91.4 cm)
    -- Duplex 48 in. (121.9 cm)
  • Recessed impeller provides steep non-overloading operating curve.
  • Oil-filled motor for max. heat dissipation and constant bearing lubrication.
  • Recessed impeller reduces radial bearing loads, increases bearing life.
  • High torque capacitor starts single phase or three phase motors for assured starting under heavy load.
  • Seal leak probe warns of leak condition, prevents costly motor damage.
  • On-winding temperature-sensitive sensor.
  • Shredding ring and impeller are replaceable without dismantling pump or motor.

WG30H-75H AND WGX30H-75H BROCHURE
DOWNLOAD BROCHURE
2-15 HP WG SERIES BROCHURE
DOWNLOAD BROCHURE

WG30, WG30H, WG50, WG50H & WG75H INSTALLATION AND SERVICE MANUAL
DOWNLOAD MANUAL

WG50H & WG75H SIMPLEX & DUPLEX GRINDER PUMP RAIL INSTALLATION AND SERVICE MANUAL
DOWNLOAD MANUAL

WGX30H-75H INSTALLATION AND SERVICE MANUAL
DOWNLOAD MANUAL

WG30H-75H AND WGX30H-75H SPECIFICATIONS
DOWNLOAD SPECIFICATIONS

TYPICAL SIMPLEX INSTALLATION DRAWING FOR 3 - 7½ HP GRINDER PUMP/LIFT-OUT CHECK VALVE RAIL ASSEMBLY
DOWNLOAD DRAWING (WITH DIRECT MOUNTED PANEL)DOWNLOAD DRAWING (WITH REMOTE MOUNTED PANEL)DOWNLOAD DRAWING (WITH DIRECT MOUNTED PANEL)

TYPICAL DUPLEX INSTALLATION DRAWING FOR 3 - 7½ HP GRINDER PUMP/SLIDE-RAIL
DOWNLOAD DRAWING

TECHNICAL SPECIFICATIONS FOR 3 - 7½ HP LIFT-OUT CHECK VALVE RAIL SYSTEM
DOWNLOAD SPECIFICATIONS (STANDARD)DOWNLOAD SPECIFICATIONS (EXPLOSION-PROOF)

TECHNICAL SPECIFICATIONS FOR 3 - 7½ HP LIFT-OUT SYSTEM
DOWNLOAD SPECIFICATIONS (STANDARD)DOWNLOAD SPECIFICATIONS (EXPLOSION-PROOF)

OWNER'S MANUAL: REGAL GRINDER PUMP INSTALLATION AND SERVICE
DOWNLOAD MANUAL