Main Content Starts Here

5HP Centrifugal Grinder Vortex Impeller

  • Capacities To 185 gpm (693 lpm)
  • Pressure To 92 ft. of head (28.1 m)
  • Liquids Handling
    -- domestic raw sewage
  • Intermittent Liquid Temp. up to 140ºF (up to 60ºC)
  • Winding Insulation Temp. (Class F) 311ºF (155ºC)
  • Motor Electrical Data (Single phase motors are capacitor start type. Myers control panels or capacitor kits are recommended for proper operation and warranty.)
    -- 3450 RPM: 3–5 HP, 1 ph, 230 volt 3 ph, 200/230/460 volt 60 Hz
  • Std. Third Party Approvals CSA
  • Optional Approvals FM, Class 1, Group D (WGX30-50)
  • Acceptable pH Range 6 – 9
  • Specific Gravity .9 – 1.1
  • Viscosity 28 – 35 SSU
  • Discharge (Flange Dia.) 2½ (63.5 mm)
  • Min. Sump Diameter
    -- Simplex 36 in. (91.4 cm)
    -- Duplex 48 in. (121.9 cm)
  • Recessed impeller provides steep non-overloading operating curve.
  • Oil-filled motor for max. heat dissipation and constant bearing lubrication.
  • Recessed impeller reduces radial bearing loads, increases bearing life.
  •  High torque capacitor starts single phase or three phase motors for assured starting under heavy load.
  • Seal leak probe warns of leak condition, prevents costly motor damage.
  • On-winding temperature-sensitive sensor.
  • Shredding ring and grinding impeller are replaceable without dismantling pump or motor.
WG30-WG50 BROCHURE
DOWNLOAD BROCHURE
2-15 HP WG SERIES BROCHURE
DOWNLOAD BROCHURE

WG30, WG30H, WG50, WG50H & WG75H INSTALLATION AND SERVICE MANUAL
DOWNLOAD MANUAL

WG30-50/WGX30-50 PUMP/LIFT-OUT CHECK VALVE RAIL ASSEMBLY DIMENSIONS
DOWNLOAD DATA

WG30-50/WGX30-50 PUMP/SLIDE-RAIL ASSEMBLY DIMENSIONS
DOWNLOAD DATA

WG30-50 AND WGX30-50 SPECIFICATIONS
DOWNLOAD SPECIFICATIONS

TYPICAL SIMPLEX INSTALLATION DRAWING FOR 3 - 7½ HP GRINDER PUMP/LIFT-OUT CHECK VALVE RAIL ASSEMBLY
DOWNLOAD DRAWING (WITH DIRECT MOUNTED PANEL)DOWNLOAD DRAWING (WITH REMOTE MOUNTED PANEL)DOWNLOAD DRAWING (WITH DIRECT MOUNTED PANEL)

TYPICAL DUPLEX INSTALLATION DRAWING FOR 3 - 7½ HP GRINDER PUMP/SLIDE-RAIL
DOWNLOAD DRAWING

TECHNICAL SPECIFICATIONS FOR 3 - 7½ HP LIFT-OUT CHECK VALVE RAIL SYSTEM
DOWNLOAD SPECIFICATIONS (STANDARD)DOWNLOAD SPECIFICATIONS (EXPLOSION-PROOF)

TECHNICAL SPECIFICATIONS FOR 3 - 7½ HP LIFT-OUT SYSTEM
DOWNLOAD SPECIFICATIONS (STANDARD)DOWNLOAD SPECIFICATIONS (EXPLOSION-PROOF)

OWNER'S MANUAL: REGAL GRINDER PUMP INSTALLATION AND SERVICE
DOWNLOAD MANUAL