Main Content Starts Here

Cast Iron Submersible Sewage Pump - MWS37 Series

Bearing and Mechanical Seal – Permanently lubricated for long life.

Overload Protection – Built-in thermal overload with automatic reset.

Stainless Steel Hardware – Allows for easy disassembly after extended service.

Applications:  Sewage and Wastewater Removal

Capacities:  135 GPM 510 LPM

Shut-off head:  29’ 8.8 m

Operation: Tethered::  On: 20” 508 mm | Off: 11” 279.4 mm

Solids handling:  2” 50.8 mm

Intermittent liquid temp:  130°F 55°C

Motor:  1/2 and 3/4 HP, 1725 RPM, 115 or 230 Volt, single-phase, 60Hz. Oil-filled. Permanent split capacitor. Built-in thermal overload protection with automatic reset.

Acceptable pH range:  6-9

Shaft seal:  Type 6A or equal, Buna-N elastomers, silicon carbide seal faces, stainless steel metal parts.

Motor housing:  Cast Iron

Volute case:  Cast Iron

Impeller:  Cast Iron Vortex

Power cord:  Single phase: 20’ oil and water resistant 3 wire 16-3 SJTW-A/SJTW with UL listed integrally grounded three-prong plug.

Discharge, NPT:  3” (76.2 mm)

OWNER'S MANUAL: ME7, M37, MWS37, MWS9, MWS39
DOWNLOAD MANUAL
SELL SHEET: MWS37
DOWNLOAD SHEET