Main Content Starts Here

Cast Iron Submersible Sewage Pump - MWS5 Series

Solids Handling – 2” spherical capabilities.

Overload Protection – Built-in thermal overload with automatic reset.

Bearing and Mechanical Seal – Permanently lubricated for long life.

Stainless Steel Hardware – Allows for easy disassembly after extended service.

Serviceability – Heavy-duty lift-out ring.

Controls – Standard controls available for automatic operation.

Cord Design – In-field replaceable 50’ cord available, 115 volt only.

Solids handling:  2” 50.8 mm

Intermittent liquid temp:  130°F 54.4°C

Motor:  1/2 HP, 1550 RPM, 115 Volt or 230 Volt, single-phase, 60Hz. Oil-filled. Built-in thermal overload protection with automatic reset.

Acceptable pH range:  5-9

Shaft seal:  Type 6A Carbon and Ceramic

Motor housing:  Cast Iron

Volute case:  Cast Iron

Impeller:  Vortex reinforced Noryl® with brass threaded insert

Power cord:  10’ or 20’ water resistant 16-3 SJTW-A/SJTW with integrally grounded three-prong plug

Discharge, NPT:  2"

Operation: Tethered::  On: 16” 406.4 mm | Off: 7” 177.8 mm

Shut-off head:  18’ 5.5 m

Capacities:  130 GPM 492 LPM

Applications:  Sewage, Effluent and Wastewater Removal and Transfer, Sump Drainage, Dewatering, Flood Control

OWNER'S MANUAL: MWS5
DOWNLOAD MANUAL


SELL SHEET: MWS5
DOWNLOAD SELL SHEET