Main Content Starts Here

Pentair Myers MPN Series Shallow Well Jet Pumps, 1/2 - 1 HP Thermoplastic

MPN Series Shallow Well Jet Pumps are corrosion- and abrasion-resistant and are ideal for wells with pumping levels of 25' or less.
 
Self-priming after the pump housing is initially filled with water. Capacities to 18 GPM at 30 PSI. 
 
Available in 1/2, 3/4, and 1 HP models.
 
Supplied with the industry standard 30-50 pressure switch setting
 
  • Fiberglass-reinforced thermoplastic body provides total corrosion resistance and high resistance to abrasion
  • Shallow-well jet has corrosion-resistant polypropylene nozzle and venturi
  • Precision-molded impeller for perfect balance... ultra-smooth for highest performance and efficiency
  • Precision-molded polypropylene diffuser allows pump to prime faster, handle more air
  • Heavy-duty motor with stainless steel shaft and dual heavy-duty ball bearings
  • Dual voltage capability on all horsepowers. Factory preset to 230v but can be set to 115v easily
  • Pressure switch set to 30-50 PSI but adjustable
  • Easy removal of a single plug allows for nozzle clean-out
  • Bottom-mounted drain plug allows for easy draining and winterization

Specifications

Item #BODY CONSTRUCTIONHORSEPOWERMAXIMUM CAPACITYFLOW at 10-foot LIFT and 20 PSIMAX LIFTMAX SHUT-OFF PRESSUREMAXIMUM INLET PRESSUREPRESSURE SWITCH SETTINGSSUCTION SIZEDRIVE SIZEDISCHARGE SIZEAMP DRAW full loadRECOMMENDED BREAKERMAXIMUM WATER TEMPERATUREIMPELLERBASENOZZLEVENTURIDIFFUSER
MPN SeriesFiberglass-reinforced thermoplasticAvailable in 1/2, 3/4, or 1 HP18 GPM (model MPNE)10.2 GPM average (model MPND)25'78 PSI (model MPND)22 PSI30 - 50 PSI1-1/4" NPT (female)n/a1" NPT (female)14.8 max (model MPNE on 115v)230v/115v Dual Voltage MotorsDepends upon Voltage and Horsepower140 °F (60 °C)Engineered polymer10-gauge steelPolypropylenePolypropylenePolypropylene
Item #BODY CONSTRUCTIONHORSEPOWERMAXIMUM CAPACITYFLOW at 10-foot LIFT and 20 PSIMAX LIFTMAX SHUT-OFF PRESSUREMAXIMUM INLET PRESSUREPRESSURE SWITCH SETTINGSSUCTION SIZEDRIVE SIZEDISCHARGE SIZEAMP DRAW full loadRECOMMENDED BREAKERMAXIMUM WATER TEMPERATUREIMPELLERBASENOZZLEVENTURIDIFFUSER
MPN SeriesFiberglass-reinforced thermoplasticAvailable in 1/2, 3/4, or 1 HP18 GPM (model MPNE)10.2 GPM average (model MPND)25'78 PSI (model MPND)22 PSI30 - 50 PSI1-1/4" NPT (female)n/a1" NPT (female)14.8 max (model MPNE on 115v)230v/115v Dual Voltage MotorsDepends upon Voltage and Horsepower140 °F (60 °C)Engineered polymer10-gauge steelPolypropylenePolypropylenePolypropylene