Main Content Starts Here

Pentair Myers MPB Series High Pressure Booster Pumps

The MPB series serviceable high pressure booster pumps are the most durable booster pumps available. The floating impeller design minimizes thrust loads, allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic components.

  • True back pull-out design allows impeller and bearing frame to be backed out of volute without disturbing plumbing or mounting fixture, saving time needed for preventive maintenance
  • Precision fit impellers are designed to maximize hydraulic pressure and water delivery at each stage
  • Staging system uses ceramic wear surface for superior wear and heat resistance that's tougher than steel
  • Compact, lightweight design grabs first place for faster installation and improved economy
  • Versatile mounting base is specially designed to be an easy fit on a wider variety of challenging applications

Specifications

Item #GPMHORSEPOWERStagesMAXIMUM DISCHARGE PRESSUREMAXIMUM INLET PRESSUREMAXIMUM TOTAL PRESSUREDISCHARGE SIZEAMP DRAW full loadVoltageMAXIMUM WATER TEMPERATUREDischargeMOTOR ADAPTER & BASEImpellerDIFFUSERShaftO-RINGSMECHANICAL SEAL
MPB Series Available in 1/2, 3/4, 1, 1-1/2, 2, and 3 HP 300 PSI (model 10MPB200)80 PSIPump Pressure + Inlet Pressure Not to Exceed 315 PSI3/4", 1", or 1-1/4" NPT (model dependent) max of 26 Amps (2 HP runinng on 115v)230v/115v or 230v, AC, 1-phaseProlonged use with liquids above 140 degrees F is not recommendedCast IronCast IronAcetalPolycarbonate304 Grade Stainless SteelBuna-NMechanical Seal - Carbon/Ceramic, Buna-N
7MPB5071/29300 PSI (model 10MPB200)80 PSIPump Pressure + Inlet Pressure Not to Exceed 315 PSI  115/230Prolonged use with liquids above 140° F is not recommended.Cast IronCast IronAcetalPolycarbonate300 series stainless steelBuna-NCarbon/Ceramic, Buna-N
7MPB7573/412              
7MPB1007116              
10MPB50101/26              
10MPB75103/48              
10MPB10010110              
10MPB150101-1/214              
10MPB20010216              
20MPB1002017              
Item #GPMHORSEPOWERStagesMAXIMUM DISCHARGE PRESSUREMAXIMUM INLET PRESSUREMAXIMUM TOTAL PRESSUREDISCHARGE SIZEAMP DRAW full loadVoltageMAXIMUM WATER TEMPERATUREDischargeMOTOR ADAPTER & BASEImpellerDIFFUSERShaftO-RINGSMECHANICAL SEAL
MPB Series Available in 1/2, 3/4, 1, 1-1/2, 2, and 3 HP 300 PSI (model 10MPB200)80 PSIPump Pressure + Inlet Pressure Not to Exceed 315 PSI3/4", 1", or 1-1/4" NPT (model dependent) max of 26 Amps (2 HP runinng on 115v)230v/115v or 230v, AC, 1-phaseProlonged use with liquids above 140 degrees F is not recommendedCast IronCast IronAcetalPolycarbonate304 Grade Stainless SteelBuna-NMechanical Seal - Carbon/Ceramic, Buna-N
7MPB5071/29300 PSI (model 10MPB200)80 PSIPump Pressure + Inlet Pressure Not to Exceed 315 PSI  115/230Prolonged use with liquids above 140° F is not recommended.Cast IronCast IronAcetalPolycarbonate300 series stainless steelBuna-NCarbon/Ceramic, Buna-N
7MPB7573/412              
7MPB1007116              
10MPB50101/26              
10MPB75103/48              
10MPB10010110              
10MPB150101-1/214              
10MPB20010216              
20MPB1002017              
20MPB150201-1/29              
20MPB20020211              
20MPB30020315              
30MPB1003015              
30MPB150301-1/26              
30MPB2003027              
30MPB30030311