Pentair Pentek® ODS Series Elevator Pump Control Systems

Main Content Starts Here

Pentair Pentek® ODS Series Elevator Pump Control Systems

The Pentek® ODS Series Elevator Pump Control Systems are approved for oil/water detection in applications where oil and hydrocarbons are prohibited from being released into the environment.

KEY FEATURES

  • Control Panel -- With Separate Pump and Control Circuits
    NEMA 1 Enclosure:  8.75"H x 6.5"W x 5"D
  • Easy Installation -- Plug-in For Quick and Easy Installation.  One Pre-Set Sensor, No Field Adjustment Necessary
  • Remote Alarm
  • Multiple Indicator Lights -- Power On, Pump On, High Water, and High Oil Indicators
  • Elevator Pump Control
    • Complete Packaged System
    • 1/2 HP  115v  Sump/Effluent Pump
    • Remote Alarm
    • Easy Clamp-Mount Installation with Plug-In Ready Wiring
    • Compliant with ASME 17.1 and Local Building and Safety Codes

WARRANTY

12 months from date of purchase or 18 months from date of manufacture, whichever comes first.

Performance Curves

PerformanceCurves_ODS Series Elevator Pump Control Systems

Resources

Downloads
Specifications

BODY CONSTRUCTION:  Class 30 Cast Iron
HORSEPOWER:  1/2 HP
MAXIMUM HEAD:  62'
MAXIMUM CAPACITY:  60 GPM (3.8 LPS) up to 87 GPM (5.5LPS)
FLOW at 10' LIFT:  53 GPM (for model ODS-OSP50M1)
SWITCH TYPE:  Diaphragm Pressure Switch and Wide Angle Float Switch (manual available)
MINIMUM SUMP DIAMETER:  18" for simplex / 30" for duplex
DISCHARGE PIPE SIZE:  1-1/2" NPT (2" optional)
MAXIMUM SOLIDS HANDLING SIZE:  5/8"
AMPD DRAW (full load):  9.5 amps on 115v / 5.2 amps on 230v
CORD LENGTH:  10' SJTW (20' 30' and 50' optional)
VOLTAGE:  Available in 115v or 230v ac, 60 Hz
MAXIMUM WATER TEMPERATURE:  140°F (60°C)
MOTOR:  1/2 HP split phase with thermal overload 1750 RPM
IMPELLER:  Open Vane Naval Bronze OR Thermoplastic Vortex

Specifications

Item #HORSEPOWER
SHEF45M11/2
SHEF50M11/2
OSP50M11/2
Item #HORSEPOWER
SHEF45M11/2
SHEF50M11/2
OSP50M11/2
Show less