Pentair Hydromatic SKHD150 High-Head Cast Iron Effluent Pump

Main Content Starts Here

Pentair Hydromatic SKHD150 High-Head Cast Iron Effluent Pump

Generates high heads for bigger drain fields.

KEY FEATURES

  • Two (2) Carbon/Ceramic Type 21 Mechanical Seals Mounted in Tandem
  • Oil-Filled Motor with Automatic Reset Thermal Overload for Maximum Protection (single-phase models)
  • Upper & Lower Ball Bearing Construction
  • Piggyback Plug Available for Easy Maintenance and Switch Replacement
  • Optional Seal Failure Probe Warns of Seal Leak
  • Capacitor Start for Increased Starting Torque (single-phase models)

WARRANTY

12 months from date of purchase or 18 months from date of manufacture, whichever comes first.

Explore purchase options available for this product.
Where to Buy

Performance Curves

PerformanceCurves_High-Head 1/2 HP Effluent PumpsHigh-Head Effluent Pump 1-1/2 HP Cast Iron, 2" NPT Discharge, 3/4" Solids Handling

Specifications

Item #Horsepower
SKDH1501-1/2
Item #Horsepower
SKDH1501-1/2
Show less

BODY CONSTRUCTION:  Class 30 Cast Iron
HORSEPOWER:  1-1/2 HP
MAXIMUM HEAD:  127'
MAXIMUM CAPACITY:  55 GPM (3.5 LPS)
FLOW at 10' LIFT:  55 GPM (3.5 LPS)
SWITCH TYPE:  standard is no switch. Optional wide-angle tethered Float Available for 1-Phase Models
MINIMUM SUMP DIAMETER:  Simplex: 24" / Duplex: 36"
DISCHARGE PIPE SIZE:  1-1/2" NPT
MAXIMUM SOLIDS HANDLING SIZE:  3/4"
AMP DRAW (full load):  6.1 amps on 208v, 3phase / 12 amps on 230v, 1phase / 6 amps on 230v, 3phase / 2.5 amps on 460v / 2 amps on 575v
CORD LENGTH:  20' STW-A
VOLTAGE:  230v 1-phase OR 208v, 230v, 460v, or 560v 3-phase, 60 Hz
MAXIMUM LIQUID TEMPERATURE:  140°F (60°C)
IMPELLER CONSTRUCTION:  Thermoplastic semi-open

Back to top of page