Pentair Hydromatic SPD Series High-Head 1/2 HP Effluent Pumps

Main Content Starts Here

Pentair Hydromatic SPD Series High-Head 1/2 HP Effluent Pumps

Specifically designed to meet the demands of septic tank effluent applications that require a "high-head" dual seal pump.

KEY FEATURES

  • Two (2) Carbon/Ceramic Type 21 Mechanical Seals Mounted in Tandem
  • Oil-Filled Motor with Automatic Reset Thermal Overload for Maximum Protection (single-phase models)
  • Upper & Lower Ball Bearing Construction
  • Piggyback Plug Available for Easy Maintenance and Switch Replacement
  • Optional Seal Failure Probe Warns of Seal Leak
  • Capacitor Start for Increased Starting Torque (single-phase models)

WARRANTY

12 months from date of purchase or 18 months from date of manufacture, whichever comes first.

Find out where to purchase online or in a retail location near you.
Where to Buy

Other product images

OtherProductImage_High-Head 1/2 HP Effluent Pumps

Performance Curves

PerformanceCurves_High-Head 1/2 HP Effluent Pumps

Specifications

Item #Horsepower
SPD50H1/2
SPD100H1
Item #Horsepower
SPD50H1/2
SPD100H1
Show less

BODY CONSTRUCTION:  Class 30 Cast Iron
HORSEPOWER:  1/2 HP
MAXIMUM HEAD:  50 ft. (15.2 m)
MAXIMUM CAPACITY:  112 GPM (7.1 LPS)
FLOW at 10' LIFT:  104 GPM
SWITCH TYPE:  Diaphragm Pressure Switch
MINIMUM SUMP DIAMETER:  Simplex: 24" / Duplex: 36"
DISCHARGE PIPE SIZE:  2" NPT (3" NPT optional)
MAXIMUM SOLIDS HANDLING SIZE:  3/4"
AMP DRAW (full load):  14 amps on 115v / 7 amps on 230v 1-phase / 3.6 amps on 208v / 3.5 amps on 230v 3-phase / 1.8 amps on 460v / 1.9 amps on 575v
CORD LENGTH:  10' SJTW (20' optional)
VOLTAGE:  Available in 115v or 208v 1-phase, OR 230v, 460v, or 575v 3-phase 60 Hz
MAXIMUM LIQUID TEMPERATURE:  140°F (60°C)
IMPELLER CONSTRUCTION:  Class 30 Cast Iron, 2-vane

Back to top of page