Pentair Myers MWS5 Cast Iron Sewage Pumps

Main Content Starts Here

Pentair Myers MWS5 Cast Iron Sewage Pumps

  • Solids Handling – 2” spherical capabilities.
  • Overload Protection – Built-in thermal overload with automatic reset.
  • Bearing and Mechanical Seal – Permanently lubricated for long life.
  • Stainless Steel Hardware – Allows for easy disassembly after extended service.
  • Serviceability – Heavy-duty lift-out ring.
  • Controls – Standard controls available for automatic operation.
  • Cord Design – In-field replaceable 50’ cord available, 115 volt only.
Find out where to purchase online or in a retail location near you.
Where to Buy
Select your model and size

Specifications

Applications: Sewage, Effluent and Wastewater Removal and Transfer, Sump Drainage, Dewatering, Flood Control
Capacities: 130 GPM 492 LPM
Shut-off Head: 18’ 5.5 m
Operation Tethered: On: 16” 406.4 mm | Off: 7” 177.8 mm
Discharge, NPT: 2”
Power Cord: 10’ or 20’ water resistant 16-3 SJTW-A/SJTW with integrally grounded three-prong plug
Impeller: Vortex reinforced Noryl® with brass threaded insert
Volute Case: Cast Iron
Motor Housing: Cast Iron
Shaft Seals: Type 6A Carbon and Ceramic
Acceptable pH Range: 5-9
Motor: 1/2 HP, 1550 RPM, 115 Volt or 230 Volt, single-phase, 60Hz. Oil-filled. Built-in thermal overload protection with automatic reset.
Intermittent Liquid Temp.: 130°F 54.4°C
Solids Handling: 2” 50.8 mm
Item #HPAmps (Max)VoltagePhase CyclesCord LengthSwitch Setting OnSwitch Setting OffMechanical Switch Type
MWS550110M1/213.01151/6010'--Manual
MWS550110T1/213.01151/6010'16"7"Tethered
MWS550120M1/213.01151/6020'--Manual
MWS550120T1/213.01151/6020'16"7"Tethered
Item #HPAmps (Max)VoltagePhase CyclesCord LengthSwitch Setting OnSwitch Setting OffMechanical Switch Type
MWS550110M1/213.01151/6010'--Manual
MWS550110T1/213.01151/6010'16"7"Tethered
MWS550120M1/213.01151/6020'--Manual
MWS550120T1/213.01151/6020'16"7"Tethered
Show less
Back to top of page