- Home
- Products
- Residential
- Water Supply & Disposal
- Water Supply Pumps
- Pentair Myers QP Quick Prime Self-Priming Centrifugal Pumps
Pentair Myers QP Quick Prime Self-Priming Centrifugal Pumps
Main Content Starts Here
Pentair Myers QP Quick Prime Self-Priming Centrifugal Pumps
The Quick Prime self-priming centrifugal pump is designed for demanding jobs where a lot of water is required over a long period of time. For lawn and garden sprinkling, car washing, or other big cleaning and maintenance jobs, it's built for one purpose only - continuous high performance service.
- Ruggedly built to meet the demands for long, hard continuous service without over-working or overloading the motor
- Manufactured to precise performance specifications
- Corrosion resistant impellers for long life
- Simple design for powerful, efficient operation and easy servicing
- Proper impeller alignment for smooth, quiet running
- Unique diffuser design provides quick automatic prime. No additional water needed for repriming after installation
- Common brackets, cases and gaskets on all sizes -- simplified parts selection
Specifications
| Item # | Body Construction | Horsepower | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 30 PSI | MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure | MAXIMUM DISCHARGE PRESSURE | SUCTION SIZE | DISCHARGE SIZE | AMP DRAW full load | Voltage | SHAFT SEAL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| QP Series (3/4 thru 3 HP) - Myers | 3575 GPM (model QP15) | QP7: 45 PSI / QP10: 46 PSI / QP15: 47 PSI / QP20: 49 PSI / QP30:50 PSI | 52 PSI (model QP30) | Model, Voltage, and Phase Dependent | 115V / 230V AC, 60 Hz (2 and 3 HP are 230 volt only) | ||||||
| QP7 | High-Tensile Gray Iron | 3/4 | 40.75 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP7-3 | High-Tensile Gray Iron | 3/4 | 40.75 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP10 | High-Tensile Gray Iron | 1 | 51.2 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP10-3 | High-Tensile Gray Iron | 1 | 51.2 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP15 | High-Tensile Gray Iron | 1-1/2 | 71.6 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP15-3 | High-Tensile Gray Iron | 1-1/2 | 71.6 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP20 | High-Tensile Gray Iron | 2 | 78.9 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP20-3 | High-Tensile Gray Iron | 2 | 78.9 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP30 | High-Tensile Gray Iron | 3 | 93 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type |
| Item # | Body Construction | Horsepower | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 30 PSI | MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure | MAXIMUM DISCHARGE PRESSURE | SUCTION SIZE | DISCHARGE SIZE | AMP DRAW full load | Voltage | SHAFT SEAL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| QP Series (3/4 thru 3 HP) - Myers | 3575 GPM (model QP15) | QP7: 45 PSI / QP10: 46 PSI / QP15: 47 PSI / QP20: 49 PSI / QP30:50 PSI | 52 PSI (model QP30) | Model, Voltage, and Phase Dependent | 115V / 230V AC, 60 Hz (2 and 3 HP are 230 volt only) | ||||||
| QP7 | High-Tensile Gray Iron | 3/4 | 40.75 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP7-3 | High-Tensile Gray Iron | 3/4 | 40.75 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP10 | High-Tensile Gray Iron | 1 | 51.2 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP10-3 | High-Tensile Gray Iron | 1 | 51.2 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP15 | High-Tensile Gray Iron | 1-1/2 | 71.6 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP15-3 | High-Tensile Gray Iron | 1-1/2 | 71.6 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP20 | High-Tensile Gray Iron | 2 | 78.9 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP20-3 | High-Tensile Gray Iron | 2 | 78.9 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP30 | High-Tensile Gray Iron | 3 | 93 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type | |||||
| QP30-3 | High-Tensile Gray Iron | 3 | 93 | 1-1/2" NPT | 1-1/2" NPT | Carbon / Ceramic Mechanical Type |