Everpure EZ-RO Commercial Reverse Osmosis System

Main Content Starts Here
Previous
Next

SKU#: EV997558

EZ-RO 375/16G

Choosing the right filtration system is essential for foodservice applications to ensure a consistent, quality customer experience. The Pentair Everpure EZ-RO is all that’s needed to reduce contaminants and protect equipment with one simple system that ca

OVERVIEW

Everpure EZ-RO systems have been engineered with the customer in mind, providing a simple all-in-one solution that reduces contaminants while protecting valuable foodservice equipment. You will appreciate the overall simplicity and space-saving design of
ApplicationSystemBenefits
Coffee and EspressoEZ-RO Blended with Hydropneumatic Tank - Coffee
  • Blending for taste consistency
  • Enhanced Coffee extraction
  • Equipment protection
SteamEZ-RO with Hydropneumatic Tank - Steam
  • Optimal mineral content for proper function of conductivity sensors
  • Reduces chlorine, sediment and total dissolved solids, and buffers pH for equipment protection

Resources

Manuals
Sell/Spec Sheets
FAQs
Certifications
Warranty

Which systems require electricity? What voltage is required?

Only the atmospheric tank/processor requires a power source. 120V is required.

How long does it typically take to install the EZ-RO?

Once the installation area is prepared, the EZ-RO can be installed in 45-60 minutes. Note: Install time does not include time required to flush cartridges.

Do cartridges need to be pre-flushed?

Yes. The prefilter and mineral cartridges need to be flushed until the water runs clear. This takes about five minutes. The RO membrane needs to be flushed for at least one hour and, per the National Sanitation Foundation (NSF), up to 24 hours.

How far away can the tank be located from the processor?

The tank should be no further than 10 feet away from the processor.

How does Pentair determine which style of tank to recommend?

The style of tank depends on the tank size needed. The tank size depends on the amount of water a customer needs during peak hours and the RO membrane’s ability to refill the tank.

How often do the FC and CM cartridges need to be replaced?

Prefilter cartridges: every 6 months. Mineral addition cartridge: every 1 year or as needed. RO membrane cartridge: every 18 to 24 months.

Water Quality Association Seal

Daily Production Rate: 268.39 gpd Efficiency Rating: 45.01% Recovery Rating: 41.54% Min/Max Working Pressure: 50 - 100 psi (3.5 - 6.9 bar), non-shock Min/Max Operating Temperature: 40 - 100°F (4.4 - 37.8ºC)

Water Quality Association Seal

Recovery rating means the percentage of the influent water to the membrane portion of the system that is available to the user as RO treated water when the system is operated without a storage tank or when the storage tank is bypassed.

Efficiency Rating means the percentage of the influent water to the system that is available to the user as RO treated water under operating conditions that approximate typical daily use.

For Pentair Everpure Product Warranties

Numerous patents pending on technology and other aspects of the product design. For Pentair Patent Information 

Models / Specs

Back to top of page