- Home
- ev997576
OVERVIEW
Everpure EZ-RO systems have been engineered with the customer in mind, providing a simple all-in-one solution that reduces contaminants while protecting valuable foodservice equipment. You will appreciate the overall simplicity and space-saving design of
| Application | System | Benefits |
| Coffee and Espresso | EZ-RO Blended with Hydropneumatic Tank - Coffee |
|
| Steam | EZ-RO with Hydropneumatic Tank - Steam |
|
Resources
Manuals
Sell/Spec Sheets
FAQs
Certifications
Warranty
- EZ-RO Sell Sheet
- EV9975-51 EZ-RO 200/2G
- EV9975-52 EZ-RO 200/5G
- EV9975-53 EZ-RO 200/10G
- EV9975-54 EZ-RO 200/16G
- EV9975-55 EZ-RO 375/2G
- EV9975-56 EZ-RO 375/5G
- EV9975-57 EZ-RO 375/10G
- EV9975-58 EZ-RO 375/16G
- EV9975-59 EZ-RO 200/2G-BL
- EV9975-60 EZ-RO 200/2G-BL
- EV9975-61 EZ-RO 200/10G-BL
- EV9975-62 EZ-RO 200/16G-BL
- EV9975-63 EZ-RO 375/2G-BL
- EV9975-64 EZ-RO 375/5G-BL
- EV9975-65 EZ-RO 375/10G-BL
- EV9975-66 EZ-RO 375/16G-BL
- EV9975-67 EZ-RO 375/16ATM
- EV9975-68 EZ-RO 375/30ATM
- EV9975-69 EZ-RO 375/50ATM
- EV9975-70 EZ-RO 650/16ATM
- EV9975-71 EZ-RO 650/30ATM
- EV9975-72 EZ-RO 650/50ATM
- EV9975-73 EZ-RO 375/16ATM-BL
- EV9975-74 EZ-RO 375/30ATM-BL
- EV9975-75 EZ-RO 375/50ATM-BL
- EV9975-76 EZ-RO 650/16ATM-BL
- EV9975-77 EZ-RO 650/30ATM-BL
- EV9975-78 EZ-RO 650/50ATM-BL
Which systems require electricity? What voltage is required?
Only the atmospheric tank/processor requires a power source. 120V is required.
How long does it typically take to install the EZ-RO?
Once the installation area is prepared, the EZ-RO can be installed in 45-60 minutes. Note: Install time does not include time required to flush cartridges.
Do cartridges need to be pre-flushed?
Yes. The prefilter and mineral cartridges need to be flushed until the water runs clear. This takes about five minutes. The RO membrane needs to be flushed for at least one hour and, per the National Sanitation Foundation (NSF), up to 24 hours.
How far away can the tank be located from the processor?
The tank should be no further than 10 feet away from the processor.
How does Pentair determine which style of tank to recommend?
The style of tank depends on the tank size needed. The tank size depends on the amount of water a customer needs during peak hours and the RO membrane’s ability to refill the tank.
How often do the FC and CM cartridges need to be replaced?
Prefilter cartridges: every 6 months. Mineral addition cartridge: every 1 year or as needed. RO membrane cartridge: every 18 to 24 months.
Daily Production Rate: 268.39 gpd Efficiency Rating: 45.01% Recovery Rating: 41.54% Min/Max Working Pressure: 50 - 100 psi (3.5 - 6.9 bar), non-shock Min/Max Operating Temperature: 40 - 100°F (4.4 - 37.8ºC)
Recovery rating means the percentage of the influent water to the membrane portion of the system that is available to the user as RO treated water when the system is operated without a storage tank or when the storage tank is bypassed.
Efficiency Rating means the percentage of the influent water to the system that is available to the user as RO treated water under operating conditions that approximate typical daily use.
For Pentair Everpure Product Warranties
Numerous patents pending on technology and other aspects of the product design. For Pentair Patent Information
