Main Content Starts Here

Cast Iron Submersible Effluent Pump - ME4 Series

  • Construction – Heavy-duty cast iron motor housing and upper volute. Corrosion-resistant composite base ideal for effluent applications.
  • Bearings and Mechanical Seal – Permanently lubricated for long life.
  • Cord Seal – Prevents oil loss from and protection for motor if cord is damaged.
  • Overload Protection – Built-in thermal overload with automatic reset.
  • Intake – Built-in suction screen.

 

Applications:  Septic Tank Effluent Removal, Sump Drainage, and Circulation

Capacities:  62 GPM 235 LPM

Shut-off head:  32’ 9.8 m

Operation: Tethered:  On: 14” 355.6 mm | Off: 5” 127.0 mm

Solids handling:  1/2” spherical capability 12.7 mm

Intermittent liquid temp:  130°F 55°C

Motor:  4/10 HP, 1550 RPM, 115 Volt, 60 Hz. Class B insulation. Oil-filled shaded pole containing built-in thermal overload protection with automatic reset.

Electrical data:  115 V, 60 Hz, single phase

Acceptable pH range:  6-8

Shaft seal:  Mechanical carbon/ceramic

Motor housing:  Cast iron

Upper volute case:  Thermoplastic

Lower volute case:  Thermoplastic Vortex

Power cord:  10’ or 20’ water resistant 16-3 gauge, type SJTW-A/SJTW with integrally grounded 3-prong plug.

Discharge, NPT:  1-1/2” 38 mm

Min. sump diameter:  Simplex 18” 457 mm | Duplex 30” 762mm

 

Owner's Manual: ME4
DOWNLOAD MANUAL

Sell Sheet: ME4
DOWNLOAD SHEET